Automotive coatings
Lakiery bezbarwne
Clear coat GLT
UV resistant MS acrylic clearcoat. The coat consists of the properly thinned solution of high quality acrylic resin. The hardener is a solution of isocyanate resin. The product characterized by high resistance to atmospheric conditions.
Clear coat HS
Two-component, acrylic coat of high quality layer. The coat consists of the properly thinned solution of high quality acrylic resin. The hardener is a solution of isocyanate resin. The product is scratching and weathering resistant.
System mieszania kolorów RAL-MIX
RAL colour mixing system
Two-component acrylic paints (based on RAL system) fast drying. The product of high UV resistance and of increased hardness. Gives high quality, not chalking decoration coats of high gloss and colour resistance.
Bazy metaliczne
Special products
ETCH primer 5+1+1
Two-component etch primer (without chromates). Characterized by good adhesion. Used as a typical penetrating primer, of increased adhesion to subsequent layers, corrosion resistant.
SILVER PAINT FOR CAR CAPS
One-component paint for car cap elements made from ABS. The product of high decoration properties, good adhesion, short drying times. The colour of the paints stay the same throughout its usage.
Podkłady wypełniające
Filling primer 3+1
Two-component, high solid, acrylic filling primer of increased anti corrosion properties. Characterized by good adhesion and short drying times. Easy to use, hardens quickly and sands perfectly.
Filling primer 5+1
Two-component, high solid, acrylic filling primer of increased anti corrosion and filling properties. Characterized by increased hardness, good adhesion, easy to sand. Does not show yellowing tendency.
Thinners
Dodatki
Kity szpachlowe
Polyester body filler
Two-component body filler of higher resistance. Characterised by very good sanding, short drying times, suitable for filling losses and unevenness of the surface.
Polyester body filler with glass fibre
Two-component body filler containing cut glass fibre which increases mechanical resistance of the product. Characterised by very good sanding, short drying times. Suitable for filling losses and unevenness of the surface.